Download - Bitcoin

Dogecoin

The most amazing place on reddit! A subreddit for sharing, discussing, hoarding and wow'ing about Dogecoins. The new innovative crypto-currency.
[link]

I downloaded bootstrap.dat from torrent but still bitcoin-qt won't synchronize !

I tried to run bitcoin-qt but the synchronization was taking FOREVER (4days running and green bar was less than 10%)
So I downloaded bootstrap.dat on torrent and now the green bar is 50% but now bitcoin-qt is synchronizing with network which take FOREVER, even in 100years it won't be synched at this rate.
Where can I get a bootstrap.dat UP TO DATE, or how can I make bitcoin-qt synchronize faster .
Please don't tell me to use multibit or whatever, I know it exists but I don't know how secure it is since there is no bootstrap.dat, just answer my question how can I make bitcoin-qt work I can find no solution on the internet which is crazy.
THANK YOU
submitted by Wicelo to Bitcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

[ANN] Bitcoin blockchain data torrent

[ANN] Bitcoin blockchain data torrent submitted by jgarzik to Bitcoin [link] [comments]

My wallet has been trying to synchronize for 40 minutes now, halp?

submitted by throwawayasdf1234asd to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Start Here for Much Wallet WOW!

EDIT 2017-02-10: A word about Nodes

There is a discussion about nodes that came up today, where it seems I'm discouraging people from running the full QT/Core client. Yes and No. What I'm trying to make sure people understand is how things work, and that it is NOT mandatory to run a client in order to use Dogecoins (and yes, I realise that browser-based tools like coinb.in and wallet sweepers are 'clients' by strict definition).
That said, more nodes is absolutely a good thing for the network. Preferrably full nodes. How do you run a full node? Just run Core/QT and open up Port 22556 on your router so it can connect to more than 8 peers. What will it cost you? You need your machine to be on 24/7/365, you need enough storage for the full blockchain (currently about 20Gb. Bitcoin is over 120Gb) and enough bandwidth to keep it in sync and share blocks with peers. A couple of Gb a month, most likely. This is best done with a desktop on a wired broadband link. Or maybe a hosted VM in the cloud. :)

EDIT 2017-01-09: Wallets WITHOUT Clients

Since I started helping people on /BitcoinBeginners, I'm getting a lot of questions about how to use wallets without running clients or trusting third parties. So here are a couple of resources that will make that possible, and not just for Dogecoin:
Multi-Coin Wallet Generator Now supporting 129 currencies! Coinb.in Start by setting the currency, found in the gear wheel in the Broadcast tab. Dogecoin Wallet Sweeper Redeem 'paper' wallets containing up to about 100 UTXOs. Bitinfo Charts My favourite block explorer, handles a bunch of cryptos.
Using these resources, it is possible to hold, receive and spend coins in various currencies, without having to run QT or a 'lite' client. You can also download and run the pages on your own device.

EDIT 2016-11-23: SEMANTICS about MINING! :P

Even though there is already a section on mining below, it has been suggested given the huge number of posts on the subject that this needs to be made clearer. Since people get their panties in a twist over the word 'dead', lets change that...

MINING IS DEAD!

MINING DOGECOIN IS UNPROFITABLE!

Put simply, there is no way to mine Dogecoin and make a profit because of the massive hashpower provided by industrial-scale Litecoin miners. Mining Doge directly stopped being viable when our hashrate exploded with the introduction of AuxPoW. Mining with CPU's and GPU's died when ASICs were introduced. And mining with a laptop WILL kill your laptop and cost you a fortune to repair or replace. Mining Litecoin with an exchange that also mines Doge and others will earn less than the electricity consumed, and you won't recover your costs. Probably ever, but certainly not in any reasonable time.
Mining other currencies may be a thing, but that's beyond our scope here. This is /Dogecoin, not /GetRichMiningCryptos after all. If you want to mine the newest scamcoin for fun and profit, look elsewhere for advice. :/
Oh, and most important:

READ BEFORE YOU POST!

At any given time, there are half a dozen posts on the frontpage just like the one you're about to write, where the answers have already been given. Read them. Don't make people waste their time repeating themselves because you were too lazy to bother reading stuff. :P
So there I was, having a quiet Sundy arvo bludge, as you do, when 42points turned up on Facebook and asked me to write a new sticky post for /dogecoin. Why would he do this, when he should be having a bludge himself, I hear you ask? Well, seems he was doing exactly that, and wanted to fob off the work he’s too slack to do himself. ;) Ah well, being a sucker for punishment, I’ll grudgingly oblige I guess.
OK, first things first.

The Clients:

Dogecoin Core 1.10.0 2015-Nov-01
Bootstrap file for Core to save some download time.
Dogecoin Core Guide Wiki
MultiDoge v0.1.7 2016-Jan-31
Android Dogecoin Wallet 2.0.8 2016-Jan-18
Android Coinomi Wallet
Java Cate 0.14 alpha 2 Multicoin wallet 2016-Feb-14
Exodus multicoin wallet
iOS Doughwallet

Do you REALLY need a client?

Wallet ELI5
UTXO ELI5
Paper Wallet Generator
Sample HTML Wallet List
Dogetipbot subreddit and website
Dogechain Wallet
Block.io Wallet
Exchanges
BTC38
Poloniex
CoinSpot
ShapeShift - Not really an exchange, rather a currency trader.

Mining

Litecoinpool
Prohashing
Zpool

Explorers

BitInfoCharts - My favourite, has charts!
chain.so
dogechain.info
/dogecoindev where the devs hang out

More Info

Dogeducation
Technical Wiki
Preev currency value calculator

EDITS:

From peoplma
I was wondering if you could add just a couple things. A link to the coinomi android wallet, it's probably the best one out there. And a sentence somewhere along the lines of "if you need help with any dogecoin software you are welcome to make a post, but PLEASE include your OS, version number of the client, and any relevant transaction IDs that you are willing to share" if you can fit that in somewhere.
Also, if you want to link to Prohashing, I'm pretty sure it's the only Scrypt mining pool that will actually pay out in doge. The others I know of pay out in litecoin or bitcoin. And it's a profit switching multipool, so gives a better return than just mining ltc/doge.
And there's these two wiki articles I thought would be helpful to link /dogecoin/wiki/technical for those technically minded newbies or intermediate users who want to dig a little deeper. And maybe a link to /dogecoin/wiki/dogecoincoreguide next to the link for dogecoin core.
From pts2002
Finally a proper sticky post! Here's some other stuff you could add:
zpool.ca mining pool - You can get paid in pretty much any coin, and you can mine in multiple algos (currently mining lyra2v2 with my GPU). Doing about 500Ð/day
shapeshift.io exchange - My favourite exchange, quick and easy. No registration required!
Also, you should add some blockchain explorers!
chain.so - Support for bitcoin, litecoin and doge.
dogechain.info - Official blockchain explorer. Includes a wallet (already mentioned). Live update currently not working (?)
EDIT: Here's another thing I found!
preev.com currency value calculator - Easy way to check the value of your dogecoins (or bitcoins, or litecoins, or peercoins)!
submitted by Fulvio55 to dogecoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

[ELI5] Extracting Privkeys from QT/Core

We have a constant stream of people coming back after abandoning Dogecoin and the sub in 2014 when the price fell. These people all have old versions of QT and are now basically trying to recover their coins, presumably to cash out and abandon us again. This is causing strain for the network, as far more people are trying to leech blocks than seed them.
The thing is, none of this is necessary. Especially if you're just going to dump coins. With resources such as https://coinb.in/#settings all you need are your private keys, and you can create, sign and broadcast transactions yourself. No client required, let alone one as resource-hungry as QT.

"So, how do I get my keys?"

First of all, lets talk about data management. The overwhelming majority of coins are not lost through theft, especially direct theft of wallets (as distinct from wholesale thefts/scams/implosions like Moolah, GAW, MtGox, Cryptsy, and even our own beloved Dogetipbot). Most coins are lost because people forget about their wallets and do silly things like reformat hard drives, lose passwords and so on.
So, everyone should have a wallet list. Here is a sample bit of HTML that gives you a page with two columns of wallets, one for local wallets you would withdraw coins to, the other the third-party wallets you would deposit coins to third parties through (do note that many services use temporary addresses generated for deposits which expire after 24h or so). A page like this is how I manage my 100+ wallets, and I have copies on my network and hidden online. Such a page makes it easy to at least keep track of all your wallets, for a trivial amount of work to set up.
 
 Sample - Twitter Fr DFXXz9gq3WkgJaHn9tXRChMhFQcwm4Y251 To DByYgzd4ec5Ku9vPag8XqoBfyRpsoj8Xs3 @TipDoge Sample - Backslash Fr DSDyv83VC1QtEnmJ4ATKFn5Sw3iC12VLmX To D9MsxSyJe5Mq7fWFRpC7zQQt1gexHccN4w Backslash To DJ3GL68kw8vh99RvxnEmQKE8A3cWRoEEqo Backslash Faucet Sample - Block.io To DE5QamzWVnxK2HmCS61cUsrn9iwgTArunU Block.io 

"OK, great, so now I have a list of my wallets. Now what?"

Now you're going to need the private keys for each of those wallets. Obviously you're not going to store these in a public place though. So you will need a separate file, which can just be plain text. Copy each of those addresses into it.
Now go ahead and fire up QT. If you haven't synced it in 3 years, its going to take forever, but that doesn't matter. You don't actually need the blockchain for this, so you don't have to wait for it to catch up.
Open up the console which is in the Help menu. Then give the command dumpprivkey with the wallet address you want the key to. Then use the up-arrow key to bring that command back, replace the address with the next one, and keep going until you have them all.
It will look something like this:
 13:05:18 Welcome to the Dogecoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. 13:11:06 dumpprivkey D9xDcRthB6XP4vRGqiyKdDfVJ7CWhYuBBi 13:11:06 6KEcssuq1wWUrFVmMF8yDxHuAdQMiRezz53zDxADLmyoXnix7iM 13:12:00 dumpprivkey DUDARNrGHVTFcCgriwRWgDQJPKDuDQr9jg 13:12:00 6JNk6NNFZcr49fbsD2jcTfTxFLjJKq9DHQ5JU8CYeZ2Cz6JdKMY 13:12:25 dumpprivkey DG6xnwCT6BXePaySqU85XocobZmhbJczQH 13:12:25 6JNXFv95Mp9SzehHw9jojjdxHRNPeh77qCsRbaNwJZMp9MKCAu3 
Yes, those are real wallets. But don't bother trying to steal my coins, I just generated them on https://walletgenerator.net/ and they're empty.
That's basically it. All you need to do is add some descriptions of what the wallets are, pretty up the format to your liking, and save copies in multiple, secure places, including printed out.

Remember, if you lose your keys, OR someone else sees them, you lose your coins!

If those were my real wallets above, you could use the keys and spend my coins. So obviously, don't let anyone else, especially annoying little brothers, get their grubby hands on them. But also make sure they can be discovered if anything happens to you. That's why the printed copies... nobody is going to go trolling through your porn or warez collection on the offchance there's something valuable in there. But they will look in your safe or wherever you store other important documents. Just be sure to leave a note as to what they are and how to use them. Remember the woman who came here a couple years ago who had found a USB stick with 110 BTC in a locked wallet.dat on it from her dead husband? I sometimes wonder if she ever got the money. Don't be her. Or him.

"OK, great. Now I have my keys. What now?"

Well, you can spend coins using https://coinb.in/#settings from any wallet you have the keys to. First step is to choose the network. Dogecoin (mainnet) obviously. Then go to Transaction in the +New menu. Enter your address and hit the Load button. It will pull in the first 100 transactions. Now enter the address to pay, and the amount.
Note the Transaction Fee box!
You want this amount to be zero. Depending on whether you're moving coins to another of your wallets to consolidate them (a very good idea.. go read the UTXO ELI5, which you will find a couple pages into https://www.reddit.com/dogecoin/comments/4yts6h/start_here_for_much_wallet_wow/ - Yes, I'm going to make you work for it, cos there's tons of useful stuff there you need to know), or paying someone else, you may want to select which inputs to use.
Once you're happy with the transaction, go ahead and submit it. You will now get a block of text, which is the raw, unsigned transaction. Copy this. Go to the Sign tab. Paste it. Add your private key and Submit to sign it.
After a little bit, you will get a signed transaction. Copy it. Go to the Broadcast tab, paste it and hit Submit.
That's it. It should go into the next block in a minute or two. Yes, even without paying a mining fee. Our network is so lightly loaded that there are no contention issues like the Bitcoin people have to put up with.

"That's it? So why do I need QT?"

You don't. The process above is all that's involved in spending coins. Everything else is window dressing. So there is no need to run QT, or any other client. Oh, and since you can download the site and run it locally (mostly offline), there is no security issue beyond the usual keyloggers/spyware that can compromise anything. And by knowing how to do this, you are much better protected from accidental loss than someone who blindly trusts black boxes they don't understand.
Oh, one final thing... if you really want to help the network by seeding rather than leeching, go ahead and run a full node. Instructions are in that link above. AND you may want to help seed the bootstrap file torrent from a couple of days ago. Just because YOU don't need it, doesn't mean others don't, right?
submitted by Fulvio55 to dogecoin [link] [comments]

Bitcoin Core 0.10.1 Released

Bitcoin Core version 0.10.1 is now available from:
https://bitcoin.org/bin/bitcoin-core-0.10.1/
This is a new minor version release, bringing bug fixes and translation updates. If you are using 0.10.0, it is recommended to upgrade to this version.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues

Upgrading and downgrading

How to Upgrade

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).

Downgrade warning

Because release 0.10.0 and later makes use of headers-first synchronization and parallel block download (see further), the block files and databases are not backwards-compatible with pre-0.10 versions of Bitcoin Core or other software:
If you want to be able to downgrade smoothly, make a backup of your entire data directory. Without this your node will need start syncing (or importing from bootstrap.dat) anew afterwards. It is possible that the data from a completely synchronised 0.10 node may be usable in older versions as-is, but this is not supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.

Notable changes

This is a minor release and hence there are no notable changes. For the notable changes in 0.10, refer to the release notes for the 0.10.0 release at https://github.com/bitcoin/bitcoin/blob/v0.10.0/doc/release-notes.md

0.10.1 Change log

Detailed release notes follow. This overview includes changes that affect external behavior, not code moves, refactors or string updates.
RPC:
Block (database) and transaction handling:
P2P protocol and network code:
Validation:
Build system:
Wallet:
GUI:
Tests:
Miscellaneous:

Credits

Thanks to everyone who contributed to this release:
As well as everyone that helped translating on Transifex.
submitted by harda to Bitcoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

Bootstrapping a bitcoin core wallet

Hi,
I haven't run my wallet (bitcoin-qt) in quite some time and today I decided to open it up. My local copy of the blockchain is 40 weeks behind (yeah, life get's in the way sometimes), and it looks like it will take several days to get up to date.
So I've been looking for the bootstrap.dat file and had a hard time finding it. According to a quora article the reason it's no longer available is that since version 0.10.0 synchronization is faster than downloading and processing the bootstrap file.
I'm running the latest version (0.13.1) and in about 3 hours it got from 40 to 39 weeks behind. I do have quite a hefty pipe at 250 Mbps, so bandwidth shouldn't be an issue. I thought that maybe the new "fast synch" doesn't play well with an existing blockchain and only kicks in when it starts from zero, so I renamed the bitcoin dir and started from a new empty one. After seeing it crawl through a couple thousand blocks at roughly the same speed it did with the 40 week-old blockchain, it was clear it wouldn't end in a reasonable time.
So I'm now downloading a bootstrap.dat file I found in this bitcointalk post, but it could very well be a bogus or invalid file. Of course if that's the case it won't sync with the network, but it's a lot of bandwidth and time just to find out, isn't it?
So, my question is: Why isn't the fast synch working? How are unsuspecting newbies supposed to use the core client? If the community is generating boostrap files, why not publish them where they can easily be found?
Meh, I'll have it working in a few hours, but this experience put me in a foul mood. Sorry for the rant.
submitted by jungle to Bitcoin [link] [comments]

State of the Redd-Nation :: August 08, 2016

Reddcoin Weekly Development Update

Welcome again Reddheads to another weekly update of Reddcoin Development.
This month of August will usher in a new era for Reddcoin and its future development.
After 9 months of work, and with the help of volunteers for testing and translations, and with some work provided by the original developers, I am pleased to announce that the new Reddcoin wallet v2.0 is ready to go live onto the main blockchain.
If you are not aware, with this release we have taken a fork from Bitcoin (rather than Litecoin as originally). Using this as a base, it will pave the way for easier feature implementation from the upstream Bitcoin core software that launched most other coins.
Thank you everyone for your patience while this work has been undertaken. And thank you for everyone who took the time to get involved. Over the coming months, the goal will be to introduce more upstream updates into the Reddcoin Core to further improve the Reddcoin network..
Here is the current status of what else is happening:

New v2.0 Wallet is now ready

I have been saying it for a while now, but I am pleased to announce to you that the new wallet is now ready. I have completed putting the finishing touches and tidying the repository to a point where I feel it is ready for mainstream adoption.
Release Date: 13th August 2016 AEST (Australian Eastern Standard Time)

Notable changes

Reddcoin v2.0 will be provided as both downloadable binaries and also compile from source
In the meantime, in preparation of this public release of the new wallet, I am continuing to contact and engage with the various major exchanges and 3rd party services to advise them that we will have an updated wallet in the near future.

Developers wanted

If your interested in c++, js or python drop me a line, I have some interesting projects that need attention.

Getting involved

We are a global community, and cross many borders but boundaries do not need to hinder us.
The crypto currency world has not reached its tipping point yet, but when it does, it is sure to escalate at an amazing rate. There are going to be many ups and downs, and an interesting ride for sure.
If you would like to get involved and dont know where to start, reach out and we will see where you can jump in @Deadpool has a great Trello site going with activities that need looking at.

In Closing

Thank you for your patience. I know in this arena things projects move fast, but I am confident that we now have a platform to move forward. There are lots of exciting projects out there, but none quite touch on the ideas I have in mind.
As always, there is still plenty to do, and there is no time for resting.
So where ever you are, enjoy your week ahead
Keep on staking!
Gnasher (John Nash)
x-posted (https://www.reddcointalk.org/topic/866/state-of-the-redd-nation-august-08-2016)
submitted by cryptognasher to reddCoin [link] [comments]

Want to buy a small amount, getting pretty frustrated.

I only want to by about $15 worth of BTC.
I'm verified at VoS but my only options there are a certified cheque sent by registered mail (aprox $8.00) or a wire transfer with a $15 fee.
I tried quickBT but have a Visa interact card with TD which isn't supported in the online interact payment. The only other bank accounts I have are with unsupported banks (by any service I've found).
Everyone local to me selling on localbitcoins is looking for a minimum of $100.
I'm waiting for verification with libertybit.com because it looks like they have an email interac option once the verification is complete. Hopefully this works out after verification.
I really want to get into this as I feel BTC is going places. But damn this has been frustrating. Thanks for the vent session.
Also, BTW if anyone knows, I've been trying to get an online armory install working. It's downloaded the whole blockchain (roughly 49gb, yikes) and is working on building the databases. Every time it gets to 98% with 1 minute left and hangs there for hours. I just upped the RAM to 6gb and am letting it try again so we'll see. Anyone have anything similar that they managed to get working?
Edit +16 hours later: I'm going to try again with Armory but this time I'm downloading and installing bitcoin-qt first, with the bootstrap.dat file pre-downloaded. I'll let bitcoin-qt scan and update the blockchain first and then I'll install armory after. I'm also NOT using a VM this time so we'll see what happens. I have an offline version setup and have the watching only wallet exported, but cant do anything with it until i get this rolling.
submitted by belligerent_coffee to BitcoinCA [link] [comments]

How long should it take for Bitcoin QT to catch up?

I downloaded the latest bootstrap.dat from here: https://bitcoin.org/en/download
Placed the completed bootstrap.dat into the data folder (Windows 8) and started Bitcoin QT. It ran for some time saying importing blocks and it has completed as far as I can see.
For the last 24 hours it has said: "Synchronizing with network ... 265 weeks behind"
The blocks folder is 14.1GB. The last block file seems to be getting modified regularly but I am surprised the overall status has not moved from 265 weeks. Its name is: blk00112.dat 14-02-06 5:35PM (about seven minutes ago)
submitted by Dimtar to Bitcoin [link] [comments]

Start Here for Much Wallet WOW!

Copied from /dogecoin

https://www.reddit.com/dogecoin/comments/4yts6h/start_here_for_much_wallet_wow/
So there I was, having a quiet Sundy arvo bludge, as you do, when 42points turned up on Facebook and asked me to write a new sticky post for /dogecoin. Why would he do this, when he should be having a bludge himself, I hear you ask? Well, seems he was doing exactly that, and wanted to fob off the work he’s too slack to do himself. ;) Ah well, being a sucker for punishment, I’ll grudgingly oblige I guess.
OK, first things first.

The Clients:

Dogecoin Core 1.10.0 2015-Nov-01
Bootstrap file for Core to save some download time.
Dogecoin Core Guide Wiki
MultiDoge v0.1.7 2016-Jan-31
Android Dogecoin Wallet 2.0.8 2016-Jan-18
Android Coinomi Wallet
Java Cate 0.14 alpha 2 Multicoin wallet 2016-Feb-14
iOS Doughwallet

Do you REALLY need a client?

Wallet ELI5
UTXO ELI5
Paper Wallet Generator
Sample HTML Wallet List
Dogetipbot subreddit and website
Dogechain Wallet
Block.io Wallet
Exchanges
BTC38
Poloniex
CoinSpot
ShapeShift - Not really an exchange, rather a currency trader.

Mining

Litecoinpool
Prohashing
Zpool

Explorers

BitInfoCharts - My favourite, has charts!
chain.so
dogechain.info
/dogecoindev where the devs hang out

More Info

Dogeducation
Technical Wiki
Preev currency value calculator

EDITS:

From peoplma
I was wondering if you could add just a couple things. A link to the coinomi android wallet, it's probably the best one out there. And a sentence somewhere along the lines of "if you need help with any dogecoin software you are welcome to make a post, but PLEASE include your OS, version number of the client, and any relevant transaction IDs that you are willing to share" if you can fit that in somewhere.
Also, if you want to link to Prohashing, I'm pretty sure it's the only Scrypt mining pool that will actually pay out in doge. The others I know of pay out in litecoin or bitcoin. And it's a profit switching multipool, so gives a better return than just mining ltc/doge.
And there's these two wiki articles I thought would be helpful to link /dogecoin/wiki/technical for those technically minded newbies or intermediate users who want to dig a little deeper. And maybe a link to /dogecoin/wiki/dogecoincoreguide next to the link for dogecoin core.
From pts2002
Finally a proper sticky post! Here's some other stuff you could add:
zpool.ca mining pool - You can get paid in pretty much any coin, and you can mine in multiple algos (currently mining lyra2v2 with my GPU). Doing about 500Ð/day
shapeshift.io exchange - My favourite exchange, quick and easy. No registration required!
Also, you should add some blockchain explorers!
chain.so - Support for bitcoin, litecoin and doge.
dogechain.info - Official blockchain explorer. Includes a wallet (already mentioned). Live update currently not working (?)
EDIT: Here's another thing I found!
preev.com currency value calculator - Easy way to check the value of your dogecoins (or bitcoins, or litecoins, or peercoins)!
submitted by Fulvio55 to dogeducation [link] [comments]

bitcoin-qt not unpacking bootstrap.dat

I downloaded a copy of bootstrap.dat for a node I'm trying to set on a raspberry pi (raspbian OS, based on Debian). I placed it on ./bitcoin dir, wich is the right place according to what i read. Still, when I open bitcoin-qt it acts likes there's nothing there and starts synchronizing the chain from scratch. Am I missing something?
submitted by natonnelier to Bitcoin [link] [comments]

Is it possible to move my Wallet.dat file to a new bitcoin wallet since my old one seems to be stuck at 90% synchronization

A couple of months ago I transferred 6 Bitcoins from my BTC-E user wallet to my own Bitcoin-QT wallet. Then a couple of days ago I wanted to check if they had been transferred, but I saw that I had to sync the wallet which I did for probably 40-60 hours. I have posted several posts on reddit and other forums since I have had A LOT of issues with synchronizing without Bitcoin-QT shutting down all the time. I downloaded the bootstrap.dat file to speed things up, uploaded my Bitcoin-QT client but still I am getting a new popup error every time I have been syncing my Bitcoin-QT for a couple of hours. If I leave my Mac for 5 hours usually I am able to sync 0,8-1,5 %, but since I reached about 88-90% completed I am getting errors all the time.
Is there any way to install a new wallet that WORKS and then just transfer the wallet.dat file over in the new wallet's directory? I checked blockchain, and it says that the bitcoins are there, but I would really like to get it all sorted since it is actually quite a sum of money that I have lying around somewhere which I cannot use at the moment.
submitted by smirkypigeon to Bitcoin [link] [comments]

Bitcoin Core 0.11.0 released | Wladimir J. van der Laan | Jul 12 2015

Wladimir J. van der Laan on Jul 12 2015:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Bitcoin Core version 0.11.0 is now available from:
<https://bitcoin.org/bin/bitcoin-core-0.11.0/>
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
<https://github.com/bitcoin/bitcoin/issues>
The entire distribution is also available as torrent:
magnet:?xt=urn:btih:82f0d2fa100d6db8a8c1338768dcb9e4e524da13&dn;=bitcoin-core-0.11.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F 
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrade warning
Because release 0.10.0 and later makes use of headers-first synchronization and
parallel block download (see further), the block files and databases are not
backwards-compatible with pre-0.10 versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility. There are no
known problems when downgrading from 0.11.x to 0.10.x.
Important information

Transaction flooding
At the time of this release, the P2P network is being flooded with low-fee
transactions. This causes a ballooning of the mempool size.
If this growth of the mempool causes problematic memory use on your node, it is
possible to change a few configuration options to work around this. The growth
of the mempool can be monitored with the RPC command getmempoolinfo.
One is to increase the minimum transaction relay fee minrelaytxfee, which
defaults to 0.00001. This will cause transactions with fewer BTC/kB fee to be
rejected, and thus fewer transactions entering the mempool.
The other is to restrict the relaying of free transactions with
limitfreerelay. This option sets the number of kB/minute at which
free transactions (with enough priority) will be accepted. It defaults to 15.
Reducing this number reduces the speed at which the mempool can grow due
to free transactions.
For example, add the following to bitcoin.conf:
minrelaytxfee=0.00005 limitfreerelay=5 
More robust solutions are being worked on for a follow-up release.
Notable changes

Block file pruning
This release supports running a fully validating node without maintaining a copy
of the raw block and undo data on disk. To recap, there are four types of data
related to the blockchain in the bitcoin system: the raw blocks as received over
the network (blk???.dat), the undo data (rev???.dat), the block index and the
UTXO set (both LevelDB databases). The databases are built from the raw data.
Block pruning allows Bitcoin Core to delete the raw block and undo data once
it's been validated and used to build the databases. At that point, the raw data
is used only to relay blocks to other nodes, to handle reorganizations, to look
up old transactions (if -txindex is enabled or via the RPC/REST interfaces), or
for rescanning the wallet. The block index continues to hold the metadata about
all blocks in the blockchain.
The user specifies how much space to allot for block & undo files. The minimum
allowed is 550MB. Note that this is in addition to whatever is required for the
block index and UTXO databases. The minimum was chosen so that Bitcoin Core will
be able to maintain at least 288 blocks on disk (two days worth of blocks at 10
minutes per block). In rare instances it is possible that the amount of space
used will exceed the pruning target in order to keep the required last 288
blocks on disk.
Block pruning works during initial sync in the same way as during steady state,
by deleting block files "as you go" whenever disk space is allocated. Thus, if
the user specifies 550MB, once that level is reached the program will begin
deleting the oldest block and undo files, while continuing to download the
blockchain.
For now, block pruning disables block relay. In the future, nodes with block
pruning will at a minimum relay "new" blocks, meaning blocks that extend their
active chain.
Block pruning is currently incompatible with running a wallet due to the fact
that block data is used for rescanning the wallet and importing keys or
addresses (which require a rescan.) However, running the wallet with block
pruning will be supported in the near future, subject to those limitations.
Block pruning is also incompatible with -txindex and will automatically disable
it.
Once you have pruned blocks, going back to unpruned state requires
re-downloading the entire blockchain. To do this, re-start the node with
  • -reindex. Note also that any problem that would cause a user to reindex (e.g.,
disk corruption) will cause a pruned node to redownload the entire blockchain.
Finally, note that when a pruned node reindexes, it will delete any blk???.dat
and rev???.dat files in the data directory prior to restarting the download.
To enable block pruning on the command line:
  • - -prune=N: where N is the number of MB to allot for raw block & undo data.
Modified RPC calls:
    • getblockchaininfo now includes whether we are in pruned mode or not.
    • getblock will check if the block's data has been pruned and if so, return an
error.
  • - getrawtransaction will no longer be able to locate a transaction that has a
UTXO but where its block file has been pruned.
Pruning is disabled by default.
Big endian support
Experimental support for big-endian CPU architectures was added in this
release. All little-endian specific code was replaced with endian-neutral
constructs. This has been tested on at least MIPS and PPC hosts. The build
system will automatically detect the endianness of the target.
Memory usage optimization
There have been many changes in this release to reduce the default memory usage
of a node, among which:
    • Accurate UTXO cache size accounting (#6102); this makes the option -dbcache
    precise where this grossly underestimated memory usage before
    • Reduce size of per-peer data structure (#6064 and others); this increases the
    number of connections that can be supported with the same amount of memory
    • Reduce the number of threads (#5964, #5679); lowers the amount of (esp.
    virtual) memory needed
Fee estimation changes
This release improves the algorithm used for fee estimation. Previously, -1
was returned when there was insufficient data to give an estimate. Now, -1
will also be returned when there is no fee or priority high enough for the
desired confirmation target. In those cases, it can help to ask for an estimate
for a higher target number of blocks. It is not uncommon for there to be no
fee or priority high enough to be reliably (85%) included in the next block and
for this reason, the default for -txconfirmtarget=n has changed from 1 to 2.
Privacy: Disable wallet transaction broadcast
This release adds an option -walletbroadcast=0 to prevent automatic
transaction broadcast and rebroadcast (#5951). This option allows separating
transaction submission from the node functionality.
Making use of this, third-party scripts can be written to take care of
transaction (re)broadcast:
    • Send the transaction as normal, either through RPC or the GUI
    • Retrieve the transaction data through RPC using gettransaction (NOT
    getrawtransaction). The hex field of the result will contain the raw
    hexadecimal representation of the transaction
    • The transaction can then be broadcasted through arbitrary mechanisms
    supported by the script
One such application is selective Tor usage, where the node runs on the normal
internet but transactions are broadcasted over Tor.
For an example script see [bitcoin-submittx](https://github.com/laanwj/bitcoin-submittx).
Privacy: Stream isolation for Tor
This release adds functionality to create a new circuit for every peer
connection, when the software is used with Tor. The new option,
-proxyrandomize, is on by default.
...[message truncated here by reddit bot]...
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-July/009400.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Can bitcoin scale to be the global reserve currency that we all want it to be?

I ask because after becoming interested in btc a couple of weeks ago, I've just downloaded and installed Bitcoin QT.
Despite using the torrent for bootstrap.dat (which downloaded in ~10 minutes) it still took the best part of 24 hrs for the client to get up to date.
I just closed the client by mistake, and on re-launching it it seems it needs to re-synchronise. This is happening faster, but still far from a speedy process.
I'm on 80Mbit by the way. A fairly quick connection.
Obviously computers and networks are getting faster and, and maybe extra people using the client will help as well?
But I fear those things will be outstripped by the exponential growth we're seeing in btc at the moment.
If it takes this long to sync at the moment, what will it be like a year or two from now when the daily transaction volume is 1000x what we have at the moment?
Also what about the sheer SIZE of the blockchain? It's 23GB already on my PC. Won't it become terabytes in no time? And exabytes long before petabyte drives are commonplace?
Are these genuine problems, or are people working on improving this stuff?
submitted by codemunky to Bitcoin [link] [comments]

Bitcoin qt not downloading blockchain

Hi /Bitcoin
I have a problem with my bitcoin qt client, I have used my wallet on the client to send and receive bitcoins several times, but recently it has just stopped downloading the blockchain, it is stuck on 282 weeks, since I have bitcoins on the wallet I'm not really happy to lose it.
Here is a list of what I have tried
  1. Downloading the blockchain (bootstrap.dat) from a torrent and moving it to C:\Users\"USER"\AppData\Roaming\Bitcoin, but this just renames the file to bootstrap.dat.old after a while.
  2. Downloading the new bitcoin qt version(v0.9.1.0)
  3. Letting it download for several hours
Nothing works and it just keeps saying "Synchronizing with network" and "282 weeks behind"
submitted by StuckInProcess to Bitcoin [link] [comments]

HOW TO DOWNLOAD AND USE THE BOOTSTRAP FILE How To Quickly Sync A Wallet with Bootstrap (Litecoin/Bitcoin) How to run Bitcoin Core 0.9.2.1 on external Hard Drive bootstrap - YouTube

Most of the Altcoin core wallets are based on Bitcoin QT wallet. At some point of time you may face synchronization issues with your core wallet. If your wallet is not syncing then there are quite a few ways to troubleshoot and fix it. If none of the troubleshooting methods work then only way to fix your wallet is by deleting all core files and syncing the blockchain from start. Since the ... 3. Import Blockchain With this bootstrap.dat file put under the data directory, when you start up Bitcoin-Qt, if bootstrap.dat file exists, it'll automatically start importing newer blocks (bootstrap.dat) into Bitcoin-Qt. During the import, Bitcoin-Qt verifies transaction signatures and the validity of past payments, and the blockchain files will be re-indexed. As user Bitcoin has already pointed out, using a bootstrap.dat is no longer recommended—you can see the release notes for the new faster-synchronization feature here.. As a result, the bootstrap.dat torrent links were removed from bitcoin.org after a short discussion.. The bootstrap.dat file is still available here on the bitcointalk.org forum, and jgarzik has indicated that he will continue ... Download Bitcoin Core Neueste Version: 0.20.1 Download Bitcoin Core Bitcoin Core 0.20.1. Überprüfen Sie Ihre Bandbreite und den freien Speicherplatz. Die Erstsynchronisierung von Bitcoin Core dauert sehr lange und lädt eine große Menge Daten herunter. Sie sollten sicherstellen, dass Sie ausreichend Bandbreite und Speicherplatz für die volle Größe der Blockchain (über 350GB) zur ... Bootstrap Bitcoin Core deployment. Download serialized and compresssed bootstrap.dat to speed-up first-time blockchain sync. Kubernetes and Docker support.

[index] [36586] [45177] [20445] [47191] [17139] [45696] [28342] [27639] [26038] [26806]

Bitcoin Adder New Jan 10 2017 Update Bitcoin hack software bitcoin bot how to earn bitcoin

2. GO TO: https://www.pivx.org 3. GO TO: “GET PIVX” 4. GO TO: “WALLET” 5. CLICK ON: GITHUB 6. DOWNLOAD: FILE ENDING IN "bootstrap.dat.zip" ENABLE HIDDEN MENU IF NOT DONE: https://youtu.be ... bitcoin generate bootstrap.dat bitcoin button generator bitcoin barcode generator bitcoin brain wallet generator bitcoin bullshit generator bitcoin business generator bitcoin bill generator ... Add Bootstrap to LitecoinCash to sync faster Remember Download the Wallet and Bootstrap from here: https://litecoinca.sh/#download to get more peers/connections add the next lines to your config file. In this video I show you how to download the Litecoin Core Wallet, also sometimes called the Litecoin Qt wallet. I make a mistake early on in the video when I say I "install" the wallet from terminal. How to recover your wallet using .dat file - Duration: 4:24. TecraCoin 299 views. 4:24 . Getting your Private Keys from the Bitcoin Core wallet - Duration: 5:11. Bitcoin Daytrader Recommended for ...

#